Accelero Twin Turbo II

The Accelero Twin Turbo II is a dual-fan VGA cooler with enhanced multi-compatibility for present and future models. Designed to optimize performance and the overclocking capability of your system, the Accelero Twin Turbo II is your ultimate cooler for mid-range to high-end graphic cards.

Excellent Cooling Performance

Featuring two 92mm PWM fans with a maximum cooling capacity up to 250 Watts, the Accelero Twin Turbo II manages to transfer heat efficiently away from the GPU. Besides the 35-fin heatsink with 5 copper heatpipes, the pre-applied MX-4 thermal compound accelerates the heat dissipation process to ensure the VGA board is running under optimal temperature.

Accelero Twin Turbo II (at 2,000 RPM)
 58^oC
Stock cooler (at 2,000 RPM)
 69.9^oC
 Better
Ambient temperature: 25^oC

Enhanced RAM and VR Cooling

In order to boost the cooling efficiency of RAM and VR, the Accelero Twin Turbo II comes with the G-1, an electrically non-conductive thermal glue used to affix RAM and VR heatsinks on the VGA board. Unlike generic thermal tapes, the G-1 offers high thermal conductivity with excellent adhesiveness. Moreover, removing the G-1 is extremely easy without leaving any residues.

G-1 (included)
 0.75 ^oC/W
Generic Thermal Tape (thickness: 0.15 mm)
 2.56 ^oC/W
 Better
Ambienbt temperature: 25 ^oC
Tested with Accelero L2 PRO at 2,000 RPM

Virtually Silent

Thanks to the low noise impeller and patented fan holder, the Accelero Twin Turbo II runs at the minimum noise level of 0.3 sone, even at full load. Equipped with a PWM controller, the fan always runs at the optimal speed according to the load generated by the GPU.

Accelero Twin Turbo II (at 2,000 RPM)
 0.3 Sone
Stock cooler (at 2,000 RPM)
 3.7 Sone
 Better

Multi-Compatible*

The Accelero Twin Turbo II comes with a versatile mounting mechanism and an extensive RAM and VR cooling set to accommodate a broad range of models. Featuring the CrossFire and SLI compatibility the users benefit from the optimized performance of a multi-VGA setup.