| Cooling Capacity | 320W |
| Noise | ![]() |
| Installation Video: The Accelero Hybrid is the first graphics card cooler with integrated air and liquid solution in the market. It offers an all-in-one solution with 200% cooling performance and 9 times quieter than the stock cooler. While existing VGA Liquid Cooling Solutions (LCS) are restricted to a specific graphics card, this cooler is compatible to a vast range of NVIDIA and AMD graphic cards. It is also the first LCS to have an integrated active fan specifically designed to cool RAM and VR. Moreover, it is simple to use, maintenance-free and excellent value-for-money. Computer enthusiasts and gamers will definitely not want to miss this state-of-the-art integrated cooling solution. Other video can be found from HERE. | ||
| Unmatched Cooling Performance It features the F12 (a 120 mm PWM fan), a powerful heat exchanger, and the MX-4 thermal compound to transfer heat efficiently away from the GPU - with 200% cooling performance of the stock cooler. Cooling Performance on NVIDIA GeForce GTX 680 Accelero Hybrid (at 2,000 RPM) Stock cooler (at 2,000 RPM) Ambient temperature: 25oC | ||
| Enhanced RAM and VR Cooling It also comes with an Active Cooling Unit and thermal adhesive specifically designed to enhance the cooling of RAM and VR. Its aerodynamic design further maximizes the airflow efficiency on all surrounding components. RAM and VR Cooling Performance with Thermal Adhesive Thermal Adhesive (included) Generic Thermal Tape (thickness: 0.15 mm) Ambienbt temperature: 25 oC Tested with Accelero L2 PRO at 2,000 RPM | ||
| Virtually-Silent The PWM fans are both controlled by the graphics card and work according to the GPU load which minimizes the noise level. The PWM setting can be modified according to the different performance and noise priorities. Click here to see how PWM settings work. Noise Level on NVIDIA GeForce GTX 680 Accelero Hybrid (at 2,000 RPM + water pump) Stock cooler (at 2,000 RPM) | ||
| Multi-Compatible Unlike existing VGA LCS, this cooler is compatible to a vast range of NVIDIA and AMD graphics cards. | ||
| Structural Diagram: ![]() Airflow Direction on RAM and VR: ![]() 4 Flexible Airflow Directions: ![]() | ||
| Specifications (Graphic Card Module) | |
|---|---|
| Max. Cooling Capacity | 320 Watts |
| Fan (mm) | 80 mm, 900 - 2,000 RPM (controlled by PWM) |
| Bearing | Fluid Dynamic Bearing |
| Air Flow | 13.1 CFM / 22.3 m3/h |
| Noise Level | 0.3 Sone |
| Current / Voltage |
RAM & VR cooling fan: 0.16A / 12V Pump: 0.24A / 12V |
| Fan Power Consumption | 1.56W |
| Pump Power Consumption | 3.12W |
| Cold Plate Material | Copper |
| Product Dimensions (L x W x H) | 243 (L) x 112 (W) x 44.2 (H) mm |
| Net Weight | 363 g |
| Specifications (Heat Exchanger Module) | |
| Fan | 120 mm, 400 – 1,350 RPM (controlled by PWM) |
| Bearing | Fluid Dynamic Bearing |
| Heat Exchanger Type | Aluminum 1.0 |
| Air Flow | 74 CFM / 125.7 m3/h |
| Noise Level | 0.3 Sone (F12 PWM Fan Only) |
| Current / Voltage | 120mm PWM fan: 0.24A / 12V |
| F12 PWM Fan Power Consumption | 2.64W |
| Tube Length | 416 mm |
| Product Dimensions (L x W x H) | 150 (L) x 120 (W) x 52.8 (H) mm |
| Net Weight | 503 g |
| Accessories | |
| Heatsink | 31 pcs |
| Screws | 22 pcs |
| Metallic Washers | 6 pcs |
| Fiber Washers | 1 pc |
| Spacer (1.5mm) | 4 pcs |
| Spacer (3.5 mm) | 4 pcs |
| Spacer (4 mm) | 4 pcs |
| Adhesive Tape | 2 pcs |
| Insulation Tape | 5 pcs |
| Rubber Pads | 3 pcs |
| Thermal Pads | 3 pcs |
| EVA Foam | 1 pc |
| GPU Back Plate | 1 pc |
| Thermal Adhesive | 1 pc |
| MX-4 (0.5g, syringe) | 1 pc |
| Mounting Mask | 1 pc |
| Limited Warranty | 2 years |
| Packaging Dimensions (L x W x H) | 330 (L) x 188 (W) x 260 (H) mm |
| itemnumber | DCACO-V750001-GB |
| UPC | 0872767005808 |
| Gross Weight | 4.5 kg |
AMD Radeon
| Series | Chip |
|---|---|
| 8000 | |
| 7000 | 7870, |
| 6000 | 6970, 6950, 6870, 6850, 6790, |
| 5000 | 5870, 5850, |
| 4000 | 4890, 4870, |
NVIDIA
| Series | Chip |
|---|---|
| GTX | 580, 570, 560, 480, 470, 465, |
| GT |
Height Restriction Drawing
The compatibility list is based on AMD Radeon and NVIDIA's reference board layout only. ARCTIC holds no responsibility for incompatibility on non reference boards. Please check the height restriction drawing before purchase.
AnandTech : Accelero HYBRID
My experiences with the ARCTIC Accelero Hybrid have revealed a product that's not unlike a powerful weapon. The end result of having the Hybrid installed on a GeForce GTX 680 is almost something that must be seen to be believed. As I've been writing this review, I've actually been steadily testing overclocking on the GTX 680 plus Hybrid by incrementing the GPU Offset +10MHz, running it through OC Scanner X for fifteen minutes (and accepting no artifacts), then benchmarking it in 3DMark 11's Extreme test. This is by no means a thorough stability test, but it's a decent way to poke around the edges of the card's tolerances. I can't imagine how much hotter and louder it would be running with the reference cooler, but with the Hybrid at 85% it's peaking at 63C. That's at 1.3GHz, sustained load.
Tecnologia : Accelero HYBRID
The ARCTIC Accelero Hybrid has proven itself as an excellent cooling system, which is capable of lowering the GTX680's temperatures significantly during load. The noise of the entire system was also reduced significantly at the same time.
Technews : Accelero Hybrid
PWM-controlled fan method, with the minimum speed was completely silent, and rotating at maximum rate (1350 RPM) spread slightly audible air flow flap. Accelero Hybrid once again attracted the most effective when the cool air from the environment.
Techrader : Accelero Hybrid
GPU temperature: idle vs. load (both in 1,200 MHZ OC)
Accelero Hybrid: 28 vs. 51
Sapphire HD 7870 Flex: 51 vs 57
Extreme : Accelero Hybrid
Accelero Hybrid delivers! 30 degrees lower temperature on the graphics processor is a huge difference.
NextHardware : Accelero Hybrid
The temperature record with the Accelero Hybrid is excellent! The maximum temperature is only 46 C at load, whereas the temperature exceeds 80 C with the stock cooler.
Custom PC : Accelero Hybrid
The Hybrid's cooling was excellent and its GPU delta T of 26 C was a massive 24 C cooler than our GTX 680's reference cooler.
SweClockers : Accelero Hybrid
"The result of the Hybrid is really outstanding with pure performance. Graphics card temperature is impressively low even at overclocked frequencies, while noise levels are really pleasant.
In comparison with the Asus DirectCU II cooler, at full load the Hybrid runs 6oC cooler, and 23oC cooler when compared to Nvidias reference cooler.
Even when it comes to noise the Hybrid shines. Despite being armed with dual fans, the noise level kept is at a really comfortable level."
Ocaholic : Accelero Hybrid
Awesome because it is simply perfect, top performance, low noise level, extremely well furnished bundle, low VRM temps and good build quality, what do you need more?
PC Tuning : Accelero Hybrid
Arctic Cooler Accelero Hybrid is the most powerful universal cooler graphics cards on the market.
The stock coolers have no way to compete with the Accelero Hybrid(30c difference from stock cooler).
Both coolers (Accelero Xtreme III and Accelero Hybrid) are very quiet, in this aspect they are the best on the market.
Bjorn3D : Accelero Hybrid
The Accelero Hybrid combines the ease of use of an air cooler with the cooling potential of circulating liquid.It is also an excellent product, allows a huge decrease in the temperature, almost halving the idle temperatures.
Hardwaresecrets : Accelero Hybrid
The new Accelero Hybrid dropped the temperature by 35 degrees, while occupying less space and lowered the noise level by 15dB.
Clube do Hardware : Accelero Hybrid
High cooling performance and excellent overall quality.
Custom PC Review : Accelero Hybrid
The cooling performance that was achieved with the Accelero Hybrid was unbelievable.
PC World.ru : Accelero Hybrid
The cooling performance of Accelero Hybrid shows it is worth for its value. In addition, there is a noticeable difference in noise level when comparing to the stock cooler (only 23 dBA)
HWMAG : Accelero Hybrid
You will get a fresh Breeze with the new edition of the ARCTIC Breeze.
Overclock.net : Accelero Hybrid
Hybrid vastly exceeded the performance of the factory cooler. An impressive package that will tame any blazing graphics card you have to offer.
Freeocen.de : Accelero Hybrid
55oC maximum GPU temperature on a GTX680 overclocked to 1288MHz!
Kitguru : Accelero Hybrid
When compared directly against the reference cooler, the Accelero Hybrid drops load temperatures by a whopping 30c-33c. In real world terms, the Accelero Hybrid gaming load temperature is close to the idle temperature of the reference cooler. This is about as good as you could expect from any 'all in one' cooling solution.
Hardwareluxx : Accelero Hybrid
Up to 31 oC better than the reference coolers, the temperature showed a high overclocking potential. It is also compatible with all high-end cards with easy installation.
Related items:
Spare parts
Technical Support / FAQ
We would like to help you to choose the right product for you. Here you will find a list of frequently asked questions and answers to this product.
Did you get the answers for your questions?
Downloads / Files
Here you can find the downloads for this product.




