Accelero S1 PLUSPassive Graphics Card Cooler for AMD / NVIDIA
Availability: In stock
with High Compatibility - the Must-Have for
* Sold separately
In a test conducted by HW Master, the Accelero S1 PLUS reduced the GPU temperature on Sapphire HD 6570 Ultimate by 38 degrees while it was completely passive.
Equip it with an add-on fan - S1 PLUS Turbo Module, the cooling capacity of the Accelero S1 PLUS can be upgraded to 120 Watts, which is adequate enough for some of the high-end VGA cards including AMD HD 7870 and NVIDIA GTX 670.
S1 PLUS Turbo Module is required for sufficient cooling capacity on the following VGA cards.
Nvidia GeForce GTS 250, GTS 240, GTS 150, 9800 GTX+, 9800 GTX, 9800 GT, 9600 GT, 8800 GTS 512 (G92), 7950 GT
AMD Radeon R9 270X, 270, 260X; HD 8870, 7870, 7790 GH Edition, 7850, 6870, 6850, 6790, 5850, 5830, 4870, 4850, 4830, X1900 XTX, X1800 XT
Enjoy complete silence!
Technical Support / FAQ
How to unplug the PCI-E power connector?read
How to use the 4-pin adapter?read
Under what conditions do you need a 4-pin adapter?
Your graphics card
1. is using a non-standard cooler socket (e.g. 5-pin, flipped polarity) or
2. is using a passive cooler as the stock cooler
How to connect the 4-pin adapter?
The differences between 7V and 12V socket*
7V: Moderate fan speed. It gives the best balance between cooling performance and noise level. It is recommended for normal usage.
12V: Full fan speed depending on the fan design. It gives the best cooling performance and it is recommended for high duty usage.
*The fan speed is fixed regardless of the GPU's condition.
1. Ensure your PSU has spare power source and plug in the 4-pin adapter.
2. Connect your ARCTIC graphics card cooler's power plug to the preferred socket.
Please note: Make sure the connector is plugged into the corresponding socket (i.e. A 3-pin plug should be connected to a 3-pin socket and a 4-pin plug should be connected to a 4-pin socket). If the plug is connected to the wrong socket, the motor will burn immediately due to incorrect polarity.
3. Insert the graphics card with ARCTIC graphics card cooler into PC case.
4. Tie up the cables to avoid any interference with the fan set or other hardware.
The product you selected is currently unavailable. Please send us a request and we get back to as soon as possible.