Accelero Xtreme 7970AMD Graphics Card Cooler for Enthusiasts
Availability: Out of stock
the World's First 28nm AMD 7900/7800 Series GPUs
Reviewed by PC Games Hardware, the Accelero Xtreme 7970 reduced the GPU temperature on an AMD Radeon HD 7970 OC by 18 degrees.
The test done by PC Games Hardware has shown that the Accelero Xtreme 7970 is 20 times quieter comparing with the stock cooler at full load.
Thanks to the PWM control, the fan speed adjusts according to the temperature of the GPU and thus the noise level remains at an absolute minimum. Click here to see how the PWM control settings can be changed according to your performance and noise preference.
"As far as the faster fan modes of the new Accelero Xtreme 7970 are concerned, even a very efficiency cooling system from MSI can't compete against the unbeatable ARCTIC product. The latter is still 2-7 C better than MSI Twin Frozr IV at its best."
Technical Support / FAQ
How to unplug the PCI-E power connector?read
How to use the 4-pin adapter?read
Under what conditions do you need a 4-pin adapter?
Your graphics card
1. is using a non-standard cooler socket (e.g. 5-pin, flipped polarity) or
2. is using a passive cooler as the stock cooler
How to connect the 4-pin adapter?
The differences between 7V and 12V socket*
7V: Moderate fan speed. It gives the best balance between cooling performance and noise level. It is recommended for normal usage.
12V: Full fan speed depending on the fan design. It gives the best cooling performance and it is recommended for high duty usage.
*The fan speed is fixed regardless of the GPU's condition.
1. Ensure your PSU has spare power source and plug in the 4-pin adapter.
2. Connect your ARCTIC graphics card cooler's power plug to the preferred socket.
Please note: Make sure the connector is plugged into the corresponding socket (i.e. A 3-pin plug should be connected to a 3-pin socket and a 4-pin plug should be connected to a 4-pin socket). If the plug is connected to the wrong socket, the motor will burn immediately due to incorrect polarity.
3. Insert the graphics card with ARCTIC graphics card cooler into PC case.
4. Tie up the cables to avoid any interference with the fan set or other hardware.
The product you selected is currently unavailable. Please send us a request and we get back to as soon as possible.