Search Site

Accelero Xtreme GTX PRO

NVIDIA Graphics Card Cooler for Enthusiasts

Availability: Out of stock

USD 39.95
USD 39.95
The Best Cooling Solution for
NVIDIA GTX 285, 280, 275 and 260 Graphics Cards,
ideal for overclocking enthusiasts
"The best choice for people looking for products at a reasonable price..."
"Lower noise level than the stock cooler..."
Superior Cooling Perfomance
One 120mm PWM fans, 43 fins, 5 copper heatpipes in combination with MX-2 high performance thermal compound provides superior cooling performance.

In a test conducted by dexgo, the Accelero Xtreme GTX PRO successfully reduced the GPU temperature on Sparkle GeForce GTX 285 up to 37.5 degrees.
Cooling Performance on Sparkle GeForce GTX 285 (Full Load)
Accelero Xtreme GTX PRO
26.3 °C
Stock Cooler
57.8 °C
Better
Tested with Furmark; The ambient air temperature is measured at a short distance in front of the fan with a mCubed T-Balancer bigNG.
Data Source:
Low Noise
Its low noise impeller and patented fan holder ensures the fan is virtually low noise even under full load. The test done by Technic3d has shown that the Accelero Xtreme GTX PRO is 16.3dBA quieter compared to the stock cooler at full load.

Thanks to the PWM control, the speed of all fans adjusts according to the temperature of the GPU and thus the noise level remains at an absolute minimum which qualifies it as a silent cooler. Click here to see how the PWM control settings can be changed according to your performance and noise preference.
Noise Level on XFX GTX 280 XXX (Full Load)
Accelero Xtreme GTX PRO
34.9 dBA
Stock Cooler
51.2 dBA
Better
Tested with Furmark
Measurements were taken from oblique left front at a distance of about 50 cm.
Data Source:
Wide-compatibility
Accelero Xtreme GTX PRO is packaged with various types of RAM and voltage regulator heatsinks to fit different GTX 2xx models. Installation is fairly simple and within a minute. Users can enjoy the cooling silence brought by the Accelero Xtreme GTX PRO!
SLI Compatible
Accelero Xtreme GTX PRO is compatible with the NVIDIA SLI technology. It allows you to intelligently scale graphics performance by combining multiple NVIDIA graphics solutions in an SLI-Certified motherboard.
Max. Cooling Capacity
300 Watts
Heatsink


Heatpipes: Ø 6 mm x 5



Aluminum Fins x 83 (Thickness: 0.3 mm)
Fan




Diameter:
92 mm
Fan Speed:
900 - 2,000 RPM (Controlled by PWM) x 3 Fans
Noise Level:
0.5 Sone @ 2,000 RPM
Current / Voltage (per fan):
0.12 A / 12 V
Power Consumption:
4.32 Watts
Size & Weight


Dimensions:
290 (L) x 104 (W) x 56 (H) mm
Net Weight:
632 g
Compatibility
NVIDIA GeForce GTX 285, 280, 275, 260+, 260
Packaging & Box Content


Dimensions:
297 (L) x 109 (W) x 63 (H) mm


Warranty
Shipping Information
Item Number:
DCACO-V15D0-CSA01
UPC:
0872767002593
Gross Weight:
1,000 g

FAQ

How to unplug the PCI-E power connector?read

Pin assignments of ARCTIC VGA coolersread

Main Cable Set
Pin No.
Color
Assignment
1
Black
Ground
2
Red
VDC
3
Yellow
Signal
4
Blue
PWM

Sub-Cable Set
Pin No.
Color
Assignment
1
Red
VDC +
2
Black
Ground
3
Yellow
Signal

Note: please check before purchase whether the main cable set and sub-cable set are compatible with the fan connector pin assignment on your graphics card.

How to use the 4-pin adapter?read

Under what conditions do you need a 4-pin adapter?

Your graphics card

1. is using a non-standard cooler socket (e.g. 5-pin, flipped polarity) or
2. is using a passive cooler as the stock cooler

How to connect the 4-pin adapter?

The differences between 7V and 12V socket*

7V: Moderate fan speed. It gives the best balance between cooling performance and noise level. It is recommended for normal usage.
12V: Full fan speed depending on the fan design. It gives the best cooling performance and it is recommended for high duty usage.

*The fan speed is fixed regardless of the GPU's condition.

Steps

1. Ensure your PSU has spare power source and plug in the 4-pin adapter.

2. Connect your ARCTIC graphics card cooler's power plug to the preferred socket.

Please note: Make sure the connector is plugged into the corresponding socket (i.e. A 3-pin plug should be connected to a 3-pin socket and a 4-pin plug should be connected to a 4-pin socket). If the plug is connected to the wrong socket, the motor will burn immediately due to incorrect polarity.

3. Insert the graphics card with ARCTIC graphics card cooler into PC case.

4. Tie up the cables to avoid any interference with the fan set or other hardware.

The fan has stopped working

Purchase a spare fan for your Accelero Xtreme GTX PRO on our web shop.

Support Form

Contact Information

Your request

* Required Fields

Request Form

The product you selected is currently unavailable. Please send us a request and we get back to as soon as possible.

* Required Fields