Accelero Xtreme IV 280(X)
High End VGA CoolerAvailability: In stock
Regular Price: USD 89.99
Special Price: USD 69.99
Xtreme IV 280(X)
(at 2,000 RPM)







AMD Radeon
R9 280(X) ,270(X), R7 265, HD 8970, 8950, 8870, 7970 (GHz),7950 (Boost), 7870(XT,GHz), 7850, 6970, 6950, 6870, 6850, 6790, 5870, 5850, 5830, 4890, 4870, 4850, 4830
Accelero Xtreme IV 280X is compatible only with the graphics card using a standard size PCB with a width of 98mm.
Graphics cards with different dimensions will not be compatible with this cooler. This includes: -Low profile Graphics card
-Graphics cards with extended PCB (such as : ASUS DirectCU II R9 290, GTX780-DC2OC-3GD5)
The compatibility list is based on AMD Radeon and NVIDIA's reference board layout only. ARCTIC holds no responsibility for incompatibility on non reference boards. Please check the height restriction drawing before purchase.



Overclock.netFAQ
How to unplug the PCI-E power connector?
Pin assignments of ARCTIC VGA coolers
|
Main Cable Set
|
||
|
Pin No.
|
Color
|
Assignment
|
|
1
|
Black
|
Ground
|
|
2
|
Red
|
5-12V
|
|
3
|
Yellow
|
RPM Signal
|
|
4
|
Blue
|
PWM Signal
|
|
Sub-Cable Set
|
||
|
Pin No.
|
Color
|
Assignment
|
|
1
|
Red
|
5-12V
|
|
2
|
Black
|
Ground
|
|
3
|
Yellow
|
RPM Signal
|
Note: Please assure that the pin assignment is identical to the cooler on your graphics card. We have this far no knowledge of any graphics card manufacturer not following this standard. If it should still be the case, you can with help of a needle remove the pins from the plug and rearrange them.
How to use the 4-pin adapter?
Under what conditions do you need a 4-pin adapter?
Your graphics card
1. is using a non-standard cooler socket (e.g. 5-pin, flipped polarity) or
2. is using a passive cooler as the stock cooler
How to connect the 4-pin adapter?
The differences between 7V and 12V socket*
7V: Moderate fan speed. It gives the best balance between cooling performance and noise level. It is recommended for normal usage.
12V: Full fan speed depending on the fan design. It gives the best cooling performance and it is recommended for high duty usage.
*The fan speed is fixed regardless of the GPU's condition.
Steps
1. Ensure your PSU has spare power source and plug in the 4-pin adapter.
2. Connect your ARCTIC graphics card cooler's power plug to the preferred socket.
Please note: Make sure the connector is plugged into the corresponding socket (i.e. A 3-pin plug should be connected to a 3-pin socket and a 4-pin plug should be connected to a 4-pin socket). If the plug is connected to the wrong socket, the motor will burn immediately due to incorrect polarity.
Downloads
![]() |
Accelero Xtreme IV 280 (X) - Height Restriction Drawing (Size: 3.1 MB) |
![]() |
Accelero Xtreme IV 280 (X) - Installation Manual (English) (Size: 4.9 MB) |
![]() |
Accelero Xtreme IV 280 (X) - Installation Manual (German) (Size: 4.7 MB) |
![]() |
Accelero Xtreme IV 280 (X) - Spec Sheet (German) (Size: 843.5 KB) |
![]() |
Accelero Xtreme IV 280(X) - Spec Sheet (English) (Size: 860.1 KB) |
Support Form
SLI Bridge - 120mm FPC SLI Bridge
USD 5.99
Excl. Tax
|
4-pin Adapter - Cable
USD 1.99
Excl. Tax
|
MX-2
USD 6.99
Excl. Tax
|
MX-4
USD 8.99
Excl. Tax
|












