Wunschzettel
Pressure-optimised 140 mm Fan with PWM PST ARCTIC P14 PWM PST

P14 PWM

140 mm PWM Fan

Choose variant

Colour

Optimised for Static Pressure

During the development of the new P14 PWM, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P14 PWM is particularly suitable for use on heatsinks and radiators.

0 dB Mode — Zero rpm

The speed of the fan can be throttled down to standstill via PWM. This allows silent operation in IDLE and at the same time guarantees maximum performance when required.

More Efficient Technology

The motor is powered by a PWM IC of the newest generation, which allows the new P14 PWM to run much more efficiently than its predecessors. This saves energy without compromising performance.

Maximum Quietness, Minimum Vibration

Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC motor without a filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor.

Extended Life Span

A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Consequently, we give a manufacturer warranty of 6 years.

200 to 1700 rpm Regulated via PWM

Thanks to the 4-Pin Connector, the rpm can be regulated in a broad spectrum via PWM. In this way, noise is kept at a minimum while maximum cooling performance is guaranteed when needed.

High-Quality Bearing

Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.

Two Way Installation

  • Push warm air out of the case
  • Pull cool air into your case

Awards

Technical specifications & manual

Performance
Fan Speed:
200—1700 rpm PWM Controlled (0 rpm below 5% PWM)
Airflow:
72.80 cfm | 123.76 m³/h
Static Pressure:
2.40 mmH2O
Noise Level:
0.3 Sone
Fan
Fan Frame:
Standard
Control Type:
PWM
Connector:
4-Pin Connector
Fan Bearing:
Fluid Dynamic Bearing
Operating Ambient Temperature:
0—40 °C
Warranty:
6 Years
Electric Characteristics:
Typical Voltage:
12 V DC
Starting Voltage:
3.9 V
Current | Voltage:
0.12 A | 12 V DC
Cable Length:
400 mm
Size & Weight
Length:
140 mm
Width:
140 mm
Height:
27 mm
Weight:
194 g
  • Width: 143 mm
  • Height: 143 mm
  • Length: 29 mm
  • Weight: 0.233 kg

Product gallery

€11.99

Prices incl. VAT exl. shipping costs
Delivery time

Accessories

Accessories

Fan Grill
Protection for your Fan

€6.49

Prices incl. VAT exl. shipping costs
4-Pin PWM Fan Splitter Cable
PST Splitter Cable for Four Fans

€6.99

Prices incl. VAT exl. shipping costs
Case Fan Hub
10 Port PWM Fan Hub with SATA Power

€9.99

Prices incl. VAT exl. shipping costs

Other variants

Other variants

P14 PWM PST
140 mm PWM Fan with Cable Splitter

€11.99

Prices incl. VAT exl. shipping costs
P14 PWM PST CO
140 mm PWM Fan with Cable Splitter for Continuous Operation

€13.99

Prices incl. VAT exl. shipping costs

Our
Support

Do you need help or product advice?

Our competent customer service is at your side with questions about our products, spare parts and in case of complaints. Support