Alpine 12
Compact Intel CPU-CoolerAvailability: In stock
Top-Notch Price-Performance Ratio
Thanks to its radial heat sink and good fan design, the Alpine 12 offers a lot of performance at a very low price point. In internal tests leveled to 28 dB(A), the cooling performance of the Alpine 12 exceeded the competition, in some cases by more than 10°C.*
Alpine 12
Stock Cooler
NH-L9i
C7
I200
Avg. CPU Temp. @ 28 dB(A)
* Tested with Prime 95, CPU Power Package 65 W
Improved Cooling Performance
by New Production Process
The high thermal conductivity of aluminum is fully retained by a new type of extrusion. This new production process creates a powerful yet very compact radial heat sink. The particularly thin cooling fins of the new Alpine are fanned out in a Y-shape. This increases the surface area of the heat sink and therefore the cooling capacity.
0 dB Mode
The Alpine 12 is able to switch into silent passive mode when PWM signal is below 5 % due to its new motor. This allows working at your PC in complete silence without any unwanted noise.
< 5 % PWM
> 5 % PWM
Lower Power Consumption & Minimum Vibration
The new Alpine 12 is powered by an updated motor and runs much more efficiently than its predecessors. Due to sinus-magnetizing the new motor creates just 5 % of the vibrations from commutation of a regular DC-motor. These factors contribute towards saving energy, lowering the coil temperature and reducing vibrations to a minimum without compromising performance.
Power Consumption @ 2 000 RPM
Extended Life Span
A 10 °C lower motor temperature roughly doubles the life span of a fan.
The new ARCTIC motor has a four times longer service life through its low coil temperature.
(New ARCTIC Motor)
(Typical DC-Motor)
Coil Temperature @ 22 °C Ambient Temperature
High Quality Bearing
Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.
Pre-applied MX-2 Thermal Paste
The pre-applied, high-performance MX-2 thermal compound ensures fast and clean installation.
Easy and Tool-free Installation
Thanks to the push pins, the installation is really easy. Additional tools are not needed to install the cooler.
| 1151 | 1150 | 1155 | 1156 | 2066 | 2011(-3) | 1366 | 775 |
| Yes | Yes | Yes | Yes | No | No | No | No |
AMD Socket
| sTR4 | AM4 | AM3(+) | AM2(+) | AM1 | FM2(+) | FM1 |
| No | No | No | No | No | No | No |



| Item Number | UPC | EAN |
| ACALP00027A | 87276700936-3 | 489521370141-9 |
Manual
Downloads
![]() |
Alpine 12 - EC Declaration of Conformity (Size: 383.7 KB) |
![]() |
Alpine 12 - RoHS & REACH & PAHs declaration of Conformity (Size: 238 KB) |
![]() |
Alpine 12 - Spec Sheet (English) (Size: 1.1 MB) |
![]() |
Alpine 12 - Spec Sheet (German) (Size: 1.1 MB) |




English
Deutsch
Français
Español
Italiano
Русский
čeština
Suomalainen
Magyar
Polskie
Svensk