Facebook Instagram LinkedIn Youtube Twitter
Search Site

Accelero Hybrid 7970

AMD Graphics Card Cooler for Enthusiasts

Verfügbarkeit: Ausverkauft

9.999,99 USD
9.999,99 USD
2-in-1 Air & Liquid Cooling Solution
for AMD's First 28nm GPUs
"Compared against the reference cooler, the Accelero Hybrid drops load temperatures by a whopping 30-33°C. The Accelero Hybrid is currently the best solution you can buy for your graphics card."
"At 1.175V we could overclock the card to 1288 MHz and even then the temperature remained below 55°C!"
"The Accelero Hybrid shows its potential best under load. With 50°C it offers not just great cooling performance but also high overclocking potential given by the very low temperatures."

+Low Temperature
+Low Noise Level
+Easy Installation
+Compatible to all current high-end graphics cards
"The ARCTIC Accelero Hybrid really did bring a huge decrease in temperature to our GTX660 card (comparing with MSI Twin Frozr II). The idle temperature almost halved (39°C vs. 23°C), and the load temperature also decreased significantly (70°C vs. 43°C). Additionally, the cooler is extraordinarily quiet, and we cannot hear it over the rest of our system noise."
Unmatched Cooling Perfomance
The Accelero Hybrid features a 120 mm PWM fan, a powerful heat exchanger and the award-winning MX-4 thermal compound to deliever unmatched cooling performance at all circumstances including gaming and overclocking.

Tested by TweakTown, it lowered the GPU load temperature by 34 degrees further compared to the stock cooler.
Cooling Performance on Galaxy GeForce GTX 680 (Full Load)
Accelero Hybrid
46 °C
Stock Cooler
79 °C
Better
Ambient temperature: 24°C; tested with Furmark
Data Source:
Virtually-Silent
Tested by Hardwareluxx, the Accelero Hybrid is hardly audible even under load. Thanks to the PWM control, all fans' speed will adjust according to the temperature of the GPU and thus the noise level always remains at absolutely minimal. Click here to see how the PWM control settings can be changed according to your performance and noise preference.
Noise Level on Gigabyte GeForce GTX 670 (Full Load)
Accelero Hybrid
35.3 dBA
Windforce 3X
41.7 dBA
Stock Cooler
45.2 dBA
Better
Data Source:
Enhanced RAM and VR Cooling
It is equipped with an Active Cooling Unit and thermal adhesive designed to enhance the heat dissipation of RAM and VR. Its aerodynamic design maximizes the air flow on all components surround the GPU.
RAM and VR Cooling Performance with Thermal Adhesive
Thermal Adhesive (included)
0.86 °C/W
Generic Thermal Tape (thickness: 0.15 mm)
2.56 °C/W
Better
Ambient temperature: 25 °C | Tested with Accelero L2 Pro at 2,000 RPM
Multi-compatible
Unlike other VGA liquid cooling solutions with a limited range of compatible graphics cards, the Accelero Hybrid 7970 works with a wide range of AMD graphics cards including the latest AMD Radeon HD 7970.
Structural Diagram
Flexible Cooling and Airflow Options
Max. Cooling Capacity
320 Watts
Graphics Card Module




Diameter:
80 mm
Fan Speed:
900 - 2,000 RPM (Controlled by PWM)
Airflow:
13.1 CFM / 22.3 m³/h
Noise Level:
0.3 Sone @ 2,000 RPM
Fan Current / Voltage:
0.13 A / 12 V
Heat Exchanger Module






Fan Speed:
400 - 1,350 RPM (Controlled by PWM)
Airflow:
74 CFM / 125.7 m³/h
Noise Level:
0.3 Sone @ 1,350 RPM
Current / Voltage:
0.22 A / 12 V (F12 PWM Fan)
0.26 A / 12 V (Pump)
Power Consumption:
2.64 Watts (F12 PWM Fan)
Compatiblity
AMD Radeon*
HD 7970, 7950, 7870, 7850, 6970, 6950, 6870, 6850, 6790, 5870, 5850, 5830

* The compatibility list is based on AMD Radeon's reference board layout only. Please check the height restriction drawing before purchase.
Packaging & Box Content


Dimensions: 330 (L) x 188 (W) x 260 (H) mm

Warranty
Shipping Information
Item Number:
DCACO-V75A001-GB
UPC:
0872767006027
Gross Weight:
4,500 g
Xbitlabs
"Accelero Hybrid is just outstanding"
"The ARCTIC Accelero Hybrid is just outstanding. At the maximum speed of the radiator's 120mm fan (1350 RPM), the peak temperature of the GK104 chip overclocked to 1212/1277 MHz was only 45°C. That's 15°C better than the performance of the DirectCU II at the maximum speed of its two fans (3390 RPM). We can also note that in the automatic regulation mode of the 120 mm fan (440 to 820 RPM according to our monitoring tools), the GPU is no hotter than 60°C, which is still better than the best the DirectCU II can do!"
"The Hybrid ran quietly the whole time whereas the stock cooler was plenty loud on automatic.(Like a vacuum cleaner!)"

"Confident with the cooling headroom of the Hybrid, I pushed the overclock to the edge of... [more]
OverClockersClub
2012-09-26
+ Cool Design
+ Easy Installation
+ Superior Cooling Performance
+ Quiet Fans
+ Wide Compatibilitymore]
Hardware Overclock
2012-09-08
SweClockers
"Outstanding with pure performance"
GPU temperature idle (100% fan) vs load... [more]
Technologijos
2012-11-16
"The difference in the results of the Hybrid versus the rest of the coolers is staggering."
Overclockers
2012-10-24
"The Accelero Hybrid 7970 is the most powerful aftermarket solution ever and the first of its kind."
Xtreme Hardware
2012-10-25
"My experiences with the ARCTIC Accelero Hybrid have revealed a product that's not unlike a powerful weapon. The end result of having the Hybrid installed on a GeForce GTX 680 is almost something that must be... [more]
AnandTech
2012-12-28
Ocaholic
"Awesome because it is simply perfect"
"The test results with the Accelero Hybrid are excellent! The maximum temperature is only 46 C at load, whereas the temperature exceeds 80 C with the stock cooler."

"There is only imperceptible difference (1... [more]
NextHardware
2012-10-17
"Compared against the reference cooler, the Accelero Hybrid drops load temperatures by a whopping 30c-33c."

"The Accelero Hybrid is currently the best solution you can buy for your graphics card."
more]
Kitguru
2012-07-20
"High cooling performance and excellent overall quality"

A whopping 35 degrees drop in temperature than the reference cooler, and emitting far less noise!
Clube do Hardware
2012-09-06
"Roughly 39 dBA is the noise pressure we measure. For the card in a fully stressed status (in-game) that simply is silent -- we can hardly hear the cooling solution work at all. So that's just really... [more]
Guru3D
2012-09-27
Custom PC Review
"Unbelievable cooling performance"
"The result of the Hybrid is really outstanding with pure performance. Graphics card temperature is impressively low even at overclocked frequencies, while noise levels are really pleasant."

"In comparison... [more]
SweClockers
2012-09-28
"With the max. speed of a 120mm fan on the cooler with 1350 rpm, the peak temperature at load was 45 degree. The ASUS DirectCU II, even with two fans running at max. speed as its advantage,the Hybrid still manages... [more]
3D News
2012-12-20
"The noise for the Accelero Hybrid is only 0.3 sone, which is really quiet. The Accelero Hybrid is designed for a wide range of graphics cards for both AMD and NVIDIA, with its sufficient cooling performance, this product will be loved by a lot of overclocking fans."
Zhelezo (IRON)
2012-12-01
"At load, the noise level only increased slightly compared to idle. And the noise is too low to be heard. Hooray!"

"The Accelero Hybrid is an extremely powerful product that targets mainly overclockers. There's no denying that it is now the best cooling solution that we can find and we strongly recommend... [more]
PC Foster
2012-11-26
AnandTech
"Must be seen to be believed"
"The cooling performance that was achieved with the Accelero Hybrid was unbelievable"

"The Accelero Hybrid is hands down currently the best GPU cooler "
Custom PC Review
2012-09-02
"Awesome because it is simply perfect, top performance, low noise level, extremely well furnished bundle, low VRM temps and good build quality, what do you need more?"
Ocaholic
2012-09-19
"The ARCTIC Accelero Hybrid really did bring a huge decrease in temperatures to our GTX660 card (comparing with MSI Twin Frozr II). The idle temperature almost halved (39C vs. 23C), and the load temperature also decreased significantly (70C vs. 43C). Additionally, the cooler is extraordinarily quiet, and we cannot hear it over the... [more]
Bjorn3D
2012-09-07
55°C maximum GPU temperature on a GTX680 overclocked to 1288MHz!
Freeocen.de
2012-08-01
Pctuning
"Most powerful universal cooler"
"The Accelero Hybrid idled at an impressively cool 28°C and peaked at 59°C. Noise output was extremely minimal under both load and idle. If you're a serious overclocker looking to squeeze every last drop of performance out of your graphics card, the Accelero Hybrid is a great cooling option"
Computer Power User
2012-11-01
Hybrid outperforms that it can keep the GPU cooler than a system which is already 20 C cooler under load than the reference design.".
Tweaktown
2012-07-27
very good efficiency and optimal cooling with low noise level under any load. The temperature dropped 13 degrees compared to Accelero TT II. WOW!
U-SM.ru
2012-07-20
Up to 31°C better than the reference coolers, the temperature showed a high overclocking potential. It is also compatible with all high-end cards with easy installation.
Hardware Luxx
2012-07-13
Guru3D
"Not one card comes close to what the Hybrid offers"
The new Accelero Hybrid dropped the temperature by 35 degrees, while occupying less space and lowered the noise level by 15dB
Hardwaresecrets
2012-09-06
GPU temperature idle (100% fan) vs load... [more]
Technews
2012-11-05
"The Hybrid's cooling was excellent and its GPU delta T of 26 C was a massive 24 C cooler than our GTX 680's reference cooler, the Accelero Hybrid was noticeably quieter too."
Custom PC
2012-10-01
"Hybrid vastly exceeded the performance of the factory cooler, an impressive package that will tame any blazing graphics card you have to offer."
Overclock.net
2012-08-14
Bjorn3D
"Extraordinary quiet"
"ARCTIC Accelero Hybrid is the most powerful universal cooler graphics cards on the market with its sufficient cooling performance. It lowered the temperatures (around 30 degrees) with complete silence. The stock coolers of HD 6970 and GTX 580 simply cannot compete with it."
Pctuning
2012-09-12
You will get a fresh Breeze with the new edition of the ARCTIC Breeze.
HWMAG
2012-08-29
GPU temperature: idle vs. load (both in 1,200 MHZ OC)
Accelero Hybrid: 28 vs. 51
Sapphire... [more]
Techradar
2012-10-30
"The cooling performance of Accelero Hybrid has shown that it is worth for its value. In addition, the Hybrid is very quiet compared to the stock cooler (only 23 dBA), this is very attractive to those who want to reduce the noise generated by computer."
PC World.ru
2012-09-01
Clube do Hardware
"A whopping 35 C degrees drop"
"Would I recommend this to someone wanting to replace their stock air cooler but doesn't want to go full water or do the mod? Yes I would. It is an elegant solution and does the job and does it quietly."
Overclock.net
2012-07-10
"Accelero Hybrid delivers! 30 degrees lower temperature on the graphics processor is a huge difference."

+ Very good cooling performance
+ Low noise
+ Complete solution with numerous included accessories
+ Suitable for many graphics cards... [more]
Extreme
2012-10-18
"The core temperature has a whopping drop from 89 C to 48 C, a 41 C difference after changing from stock cooler to Accelero Hybrid."


The noise level has greatly improved, the Hybrid is very suitable for overclockers and... [more]
PC3
2012-09-06
"The cooling performance of Accelero Hybrid has shown that it is worth for its value. In addition, the Hybrid is very quiet compared to the stock cooler (only 23 dBA), this is very attractive to those who want to reduce the noise generated by computer."
PC World.ru
2012-09-12
Xtreme Hardware
"The most powerful aftermarket solution"
"The ARCTIC Accelero Hybrid has proven itself as an excellent cooling system, which is capable of lowering the GTX680's temperatures significantly during load. The noise of the entire system was also reduced significantly at the same time."
Tecnologia
2012-11-12

Manual

Manual on your mobile
Align and scan!

FAQ

Zuordnung der Kontakte der ARCTIC Grafikkartenkühlerread

Hauptkabelset
Kontakt-Nummer
Farbe
Zuordnung
1
Schwarz
Ground
2
Rot
5-12V
3
Gelb
Drehzahlsignal
4
Blau
PWM Signal

Nebenkabelset
Kontakt-Nummer
Farbe
Zuordnung
1
Rot
5-12V
2
Schwarz
Ground
3
Gelb
Drehzahlsignal

Achtung: Bitte stellen Sie sicher, dass die Zuordnung der Kontakte mit Ihrem Grafikkartenkühler identisch ist. Nach unserem Kenntnisstand folgen alle Grafikkartenhersteller diesem Standard ausnahmslos. Sollte trotzdem die Zuordnung nicht übereinstimmen, können Sie mit einer Nadel die Kontaktstifte lösen und neu anordnen.

Zisch- oder Blubbergeräuscheread

Der Accelero Hybrid ist mit Wasser gefüllt. Der Kreislauf weist jedoch auch einige Luftblasen auf, um korrekt zu funktionieren. Durch den Transport können einige Luftblasen auch den Weg in die Pumpe finden, wo sie Zisch- oder Blubbergeräusche verursachen. Dieses Geräusch verschwindet, sobald die Luftblasen zum Radiator gepumpt werden.


Stellen Sie bei der Installation sicher, dass der Radiator oberhalb der Pumpe angeordnet wird und dass der Wasser Ein- und Ausgang beim Radiator unten ist (wie in der Grafik gezeigt). Zisch- oder Blubbergeräusche werden bei laufendem System innerhalb von einigen Minuten verschwinden.


Sollte Ihre Konfiguration es erfordern, den Radiator unterhalb der Pumpe anzubringen, lassen Sie das System einige Minuten laufen und halten dabei den Radiator vertikal und hoch. Der Wasser Ein- und Ausgang des Radiators muss dabei immer unten sein.

Kompatibilität mit AMD R9-280(X), 7970 and 7950read

Der Accelero Hybrid 7970 ist zu den oben genannten Karten kompatibel sofern die GPU nach Februar 2013 gefertigt wurde. Bitte legen Sie einen Maßstab auf die GPU und überprüfen, ob zwischen Maßstab und GPU ein Spalt bleibt. Ist dies der Fall, wurde die GPU vor Februar 2013 gefertigt. Bitter verwenden Sie für diese Karten den Accelero Xtreme IV 280(X).

Verwendung des 4-Pin Lüfteradapters?read

Unter welchen Bedingungen wird der 4-Pin Lüfteradapter benötigt?

1) Die Grafikkarte verfügt nicht über einen standardisierten 4-Pin Lüfteranschluss (z.B. 5-pin, Belegung vertauscht). Oder Oder
2. Die Grafikkarte benutzt einen passiven Kühler und verfügt über keinen Lüfteranschluss.

Wie wird der 4-Pin Adapter angeschlossen?

Unterschied zwischen 7V und 12V Anschluss*

7V: Die moderate Lüftergeschwindigkeit ergibt eine gute Balance zwischen Kühlleistung und Geräuschpegel. Dies ist die empfohlene Einstellung für den Normalgebrauch.
12V: Die volle Lüftergeschwindigkeit ergibt die beste Kühlleistung und wird Leuten mit hohen Kühlansprüchen empfohlen.

*Die Lüftergeschwindigkeit ist über den Adapter fixiert, unabhängig von der GPU Temperatur

Schritte

1. Stellen Sie sicher, dass das Netzteil über einen freien Stromstecker für den Lüfteradapter verfügt.

2. Verbinden Sie den Stromsteckers Ihres ARCTIC Grafikkartenkühlers mit dem gewünschten Anschluss des Adapters.

Achtung: Stellen Sie sicher, dass für einen Adapter mit 4 Pin Anschluss nur der 4 Pin Stecker des Lüfters verwendet wird. Verfügt der Kühler noch zusätzlich über einen 3-Pin Stecker, wird dieser nicht verwendet. Ein falsches Einstecken zerstört den Lüftermotor sofort.

Supportformular

Kontaktinformationen

Ihre Anfrage

* Pflichtfelder

 

  • MX-2
    6,99 USD
    MX-2
    Vielseitig verwendbare Wärmeleitpaste
    Sichere Anwendung
    Herausragende Wärmeleitfähigkeit
  • MX-4
    7,99 USD
    MX-4
    Hochleistungs-Wärmeleitpaste
    Sichere Anwendung
    Einfaches Auftragen
  • 4-pin Adapter - Cable
    1,99 USD
    4-pin Adapter - Cable

Anfrageformular

Das von Ihnen gewählt Produkt ist momentan nicht verfügbar. Bitte senden Sie uns eine Anfrage, wird kommen gerne schnellstmöglich auf Sie zurück.

* Notwendige Felder