Search Site

Accelero Hybrid III-140

Graphics Card Cooler for Enthusiasts

Availability: Out of stock

USD 129.99
USD 129.99

Outstanding Cooling Performance for
GPU, RAM and VRM
The Accelero Hybrid III-140 combines Water Cooling Solution for the GPU with 140 mm radiator, an upgraded backplate for lower RAM temperatures and a VRM heat sink with 80 mm fan for outstanding cooling performance.
Cooling Performance & Noise Level on AMD R9-290
Accelero Hybrid III-140 (at 1,300 RPM)
46 °C (GPU)
42 °C (VRM)
0.3 Sone
Accelero Hybrid II-120(at 1,300 RPM)
60 °C
61 °C
0.3 Sone
Stock Cooler
(at 2,400 RPM)
94 °C
76 °C
1 Sone
Better
Dedicated VRM Cooling
Lower VRM temperature through specific VRM heat sink and 80 mm fan for Long Service Life.
How to choose the right VRM Cooling
Multi-Compatibility
The Accelero Hybrid III-140 features a versatile, problem free mounting system that allows this cooler to be the most compatible yet.
To check if your graphics card is compatible, please use the Compatibility Check Instruction.
Large Ram Cooler
The large heatsink cools the PCB in the RAM area and thus also the RAMs itself which are soldered onto the PCB.
Even Better Cooling Performance with Liquid Cooling Solution
This high efficiency liquid cooler installed on the GPU with award winning ARCTIC MX-4 thermal paste will lower the temperature of even the most powerful GPU. The heat exchanger maximizes the water contact surface to quickly dissipate heat. The Accelero Hybrid III-140 comes pre-filled, and never needs a refilling again.
Installation Without
Thermal Glue
Thanks to dedicated VRM heatsinks, users of graphics cards with stock layout no longer need to glue anything onto their board and thus can return it to its original condition any time.
Virtually Silent
Its low noise impeller and patented fan holder ensures the fan is ultra quiet even under full load. Thanks to the PWM control, the fan speed adjusts according to the GPU temperature and thus the noise level remains at an absolute minimum.
New Fan Controller

An improved fan controller and the use of additional filters guarantee a smooth operation with both NVIDIA and AMD graphics cards.Through software, the temperature-fan speed curve can be adjusted. No matter whether you are a hardcore-gamer or a silent enthusiast, you get the temperature and noise level exactly where you want it to be.

Max. Cooling Capacity
300 Watt
Heatsink
Fan:
80 mm (600 - 2000 RPM with PWM control)
Heat Exchanger Type:
Aluminium
Noise Level:
0.3 Sone
F14 PWM Fan Current / Voltage:
0.26 A / 12 V
Size & Weight
Compatibility
VRM Heatsink Set:
Nvidia GeForce:
GTX 980 Ti
Titan Xp, Titan X(Pascal), GTX 1080(Ti), 1070, Titan X, 980 Ti
GTX 980
GTX 980
GTX 780
GTX 780(Ti), Titan (Black)
GTX 770
GTX 770
Generic
GTX 1060, 970, 960, 760, 680, 670, 660 (Ti), 650 Ti boost, 580, 570, 560 (Ti, SE),
550 Ti, 480, 470, 465, 460 (SE), GTS 450

VRM Heatsink Set:
AMD Radeon:
R9-290(X)
R9 290(X)
R9-280(X)
Generic
RX 580, 570, 480, 470, R9 390(X), 380(X), 370X, 285, 270(X), R7 370, 265, HD 8870, 7870(XT, GHz), 7850, 6970, 6950, 6870, 6850, 6790, 5870, 5850, 5830, 4890, 4870, 4850, 3870, 3850, 3690
* The compatibility list is based on AMD Radeon and NVIDIA's reference board layout only. Please check the height restriction drawing before purchase. To check if your graphics card is compatible, please use the Compatibility Check Instruction. If you have questions, please contact our friendly support. We are happy to assist you.
Packaging & Box Content


Warranty
Shipping Information
Net Weight:
R9-290(X) - 1,412g
R9-280(X) - 1,417g
GTX 780    - 1,443g
GTX 770    - 1,445g
GTX 980    - 1,451g
Generic      - 1,362g
GTX 980 (Ti) - 1,451g
Item Number:
R9-290(X) - ACACC00015A
R9-280(X) - ACACC00016A
GTX 780    - ACACC00017A
GTX 770    - ACACC00018A
GTX 980    - ACACC00019A
Generic      - ACACC00020A
GTX 980 (Ti) - ACACC00032A
UPC:
R9-290(X) - 872767007949
R9-280(X) - 872767007956
GTX 780    - 872767007963
GTX 770    - 872767007970
GTX 980    - 872767007987
Generic      - 872767007994
GTX 980 (Ti) - 872767008199
Hardware Luxx
"The measurement results speak for themselves"
After installation everything appears reasonable processed. The fact that no heat sinks have to be glued and all parts are screwed reinforces this impression. The measurement results speak for themselves.The temperature of the GPU is significantly reduced. Under load, the cooling is efficient and quiet. Another factor is surely that a better cooling improves the overclocking potential as well. If you are looking for an AiO water cooling solution we can recommend the Accelero Hybrid III-140.
The ARCTIC Accelero Hybrid III-140 is an excellent alternative to the original graphics card coolers. The performance is really very good, both in cooling the GPU and VRM as well as the sound level.
Modding.fr
ARCTIC has simplified the process of installation and brought the system of hybrid cooling in reach of general PC users.
TecnoGeekies
The ARCTIC Accelero Hybrid III-140 delivers an optimal dissipation to any GPU available on the market, even enthusiast model, outclassing all custom air heat spreader. Overclocking yours GPU has never been so easy and even "silent".
Bits and Chips
Modding.fr
"Silent and efficient"
Performance is light years ahead of the original graphics cards coolers, even as "custom" solutions. Temperatures drop drastically in charge, not just for the GPU, as can be seen too often at the competitors who leave the VRM,... [more]
Conseil Config
The performance of the cooling system is very good, the temperature of the graphics card being reduced by approximately 10°C, also all the heat generated by the graphics card is being pushed outside the case, thus improving the... [more]
My Garage
The Accelero Hybrid III-140 ensures not only that the GeForce GTX 1080 becomes more quickly but also more quietly and that the GPU remains cooler. When talking about the volume the difference between the upgrade cooler and the founders... [more]
Hardware Luxx
Great cooling, straightforward assembly, exceptional noise cancelling properties and an appropriate price. There’s not much more to say when it comes to summing up the product. Would I recommend Arctic’s Accelero Hybrid III... [more]
Play3R
The Accelero Hybrid III-140 provides very good test results in reference to noise level and the temperatures. Also the compatibility is another positive point. We recommend the Accelero Hybrid III-140 from ARCTIC.
Modlabs
If you are looking to keep your GPU nice and cool, the Arctic Accelero Hybrid III-140 is more than up to the task. Even if you are happy with your card’s thermals but fancy a bit of extra performance or more overclocking headroom,... [more]
Kitguru
Overall very impressed with the ARCTIC Accelero Hybrid III-140 and the cooling performance! I installed this unit on to the MSI Variant of the Nvidia GTX 770 and saw the load temps drop from 78 to a cool 53 Degrees Celsius, while playing... [more]
Dans Tech
Accelero Hybrid III-140 is a great product. It cools not only efficient but is also quiet. The compatibility is very large, so it is the right choice for each graphics card. With the supplied accessories kit installation is very simple and... [more]
i2Hard
In terms of cooling performance the Accelero Hybrid III-140 is uncompromisingly, here also high-end graphic cards can keep on their winter jacket! Those who would like to have more cooling and do not dare a wholesome water cooling can look... [more]
overclock Inside
With the Hybrid III-140 you get a high-performance graphics card cooler. Exciting for power-hungry users is also that there are very good overclocking possibilities. Temperatures of high-end graphic cards can be significantly reduced... [more]
PC-Magazin
Overall, the Accelero Hybrid III by Arctic is a great solution is you wish to achieve better and quieter cooling on your GPU. Whether it be the AMD Radeon RX 480, like for me, or another supported GPU. But in conclusion, for one or two GPUs... [more]
BestVPN
The ARCTIC Accelero Hybrid III-140, similar to the 120 mm model, has got the same strengths and weaknesses, however as shown in our tests, it's the absolute king of performance, with the best possible Temperature/Noise ratio. It will... [more]
Xtreme Hardware
The Accelero Hybrid III-140 cools very effective and is totally silent. The compatibility is another plus point.
Overclockers.ru
The cooling wise of these coolers are very well. They lower the temperature considerably compared to a reference cooler.
Tweak
The ARCTIC Accelero Hybrid III-140 does an excellent job. Compared to the competitors it works better especially under overclocking where the temperatures are always low.
Guide informatica
Once the cooler has been installed, even the Founders Edition of the GTX 1070 can be used for overclocking. And even more important: under load it has never more than 60 degrees. The volume of the ventilation turns out as especially... [more]
360 ESport-Magazin
The performance of the ARCTIC Accelero Hybrid III-140 is really good on GPU, even with a 300 watt card. It's silent and the VRM temperature is cooler.
Cowcotland

Manual

Manual on your mobile
Align and scan!

FAQ

Hissing or Bubbling noise

Your Accelero Hybrid is filled with water, some air bubble are present in the circuit to allow it to work properly. During transportation, air bubble might find their way to the water pump and while functioning create hissing or bubbling noise. These noise will disappear quickly as the air bubbles are pushed to the radiator part.

When installing the Accelero Hybrid, make sure that the radiator is located higher than the water pump. If any Hissing or bubbling noise, it will quickly disappear after running the cooler for few minutes .

If your configuration requires to have the radiator located below the water pump, you need to ensure that the tubing part of the radiator is located at the bottom while installed . Hissing or Bubbling noise will take longer to disappear than if the radiator is above the card but will ultimately disappear. You can help the process by placing temporarily the radiator above the water pump and run the cooler until the noise disappears .

Compatibility with AMD R9-280(X), 7970 and 7950

The Accelero Hybrid II-120 is compatible to the above mentioned boards if the GPU was manufactured after February 2013. Please put a ruler on top of the GPU and check whether there is a gap between the ruler and the GPU.

Wrong Fan Speed with Accelero Hybrid II

Nvidia graphics cards are not controlling the fan by adjusting the PWM signal according to the temperature. Fixed fan speeds are set according to the GPU temperature, not taking care whether there is a 40mm or a 140mm fan in use. If you use a fan controller software like PrecisionX, the percentages shown correspond about as follows: 30%~1050 RPM, 40%~1400 RPM, 50%~1900 RPM, 60%~2400 RPM. The values can vary from board to board. The Hybrid II's fan reaches a maximum RPM of 1350. In order not to run at full speed at very low temperatures already, we doubled the RPM signal output. Thus the fan shows 2700 RPM even though it runs only at 1350 RPM.

Pin assignments of ARCTIC VGA coolers

Pin No.
Color
Assignment
1
Black
Ground
2
Yellow
5-12V
3
Green
RPM Signal
4
Blue
PWM Signal

Note: Please assure that the pin assignment is identical to the cooler on your graphics card. We have this far no knowledge of any graphics card manufacturer not following this standard. If it should still be the case, you can with help of a needle remove the pins from the plug and rearrange them.

How to use the 4-pin adapter?

Under what conditions do you need a 4-pin adapter?

Your graphics card

1. is using a non-standard cooler socket (e.g. 5-pin, flipped polarity) or
2. is using a passive cooler as the stock cooler

How to connect the 4-pin adapter?

The differences between 7V and 12V socket*

7V: Moderate fan speed. It gives the best balance between cooling performance and noise level. It is recommended for normal usage.
12V: Full fan speed depending on the fan design. It gives the best cooling performance and it is recommended for high duty usage.

*The fan speed is fixed regardless of the GPU's condition.

Steps

1. Ensure your PSU has spare power source and plug in the 4-pin adapter.

2. Connect your ARCTIC graphics card cooler's power plug to the preferred socket.

Please note: Make sure the connector is plugged into the corresponding socket (i.e. A 3-pin plug should be connected to a 3-pin socket and a 4-pin plug should be connected to a 4-pin socket). If the plug is connected to the wrong socket, the motor will burn immediately due to incorrect polarity.

How to Set the fan control curve by software?

Nvidia and AMD graphics cards come with a fan speed controller, which is not necessarily programmed according to your preference and focuses on holding the GPU temperature between 85 and 95°C.

Please download and install the fan controller software MSI Afterburner https://gaming.msi.com/features/afterburner

1) Please activate "Start Up" and click on the button "Fan Curve"

2) Create a fan control curve by putting control points.

Be aware that Nvidia's fan controller does no longer work with PWM values but fixed fan speeds. Thus 30%~1050 RPM, 40%~1400 RPM, 50%~1900 RPM, 60%~2400 RPM; no matter whether you use a 40mm fan which can do 10,000 RPM max or a 140mm fan which can go only up to 1400 RPM. In the later case the fan runs at the 40% setting already at full speed.

Our Recommendations:
AMD: 20%/50°C, 30%/55°C, 40%/60°C, 50%/62°C, 60%/64°C, 70%/68°C, 80%/70°C, 100%/75°C
Nvidia: 20%/2°C, 20%/50°C, 30%/60°C, 40%/65°C, 50%/70°C, 60%/75°C, 100%/85°C, 100%/90°C

Downloads

Support Form

Contact Information

Your request

* Required Fields

 

  • SLI Bridge - 120mm FPC SLI Bridge
    USD 5.99
    SLI Bridge - 120mm FPC SLI Bridge
    SLI Bridge Connector
    For two 3-Slot NVIDIA Graphics Cards
    Flexible Length of 12 cm
  • MX-2
    USD 6.99
    MX-2
    All-round Thermal Compound
    Safe Application
    Outstanding Thermal Transfer Rate
  • MX-4
    USD 7.99
    MX-4
    Highest Performance Thermal Compound
    Safe Application
    Easy Application
  • Thermal Pad
    USD 5.99
    Thermal Pad
    Electrically non-conductive
    Thermal Conductivity 6.0 W/mK
    Safe and easy handling

Request Form

The product you selected is currently unavailable. Please send us a request and we get back to as soon as possible.

* Required Fields