Accelero L2 PLUS
AMD / NVIDIA Graphics Card Cooler for QuietnessAvailability: In stock
(at 2,000 RPM)
60.4 °C
(at 2,700 RPM)
72 °C
Better
The Accelero L2 PLUS cools very efficiently due to an ultra-quiet 120 mm PWM fan. Xtreme Hardware tested the Accelero L2 PLUS and it was 29 dBA quieter compared to the stock cooler under full load. .
Thanks to the PWM control, the speed of both fans adjusts according to the temperature of the GPU and thus the noise level remains at an absolute minimum which qualifies it as a silent cooler. Click here to see how the PWM control settings can be changed according to your performance and noise preference.
(at 2,000 RPM)
0.4 Sone
(at 2,700 RPM)
0.7 Sone
Better
(included)
0.86°C/W
Tape(thickness: 0.15mm)
2.56°C/W
Better
Aluminum
RX 460, R7 370, 360, 260(X), 250 (X), 240, HD 8760, 8740, 7850, 7790, 7770 (GHz), 7750, 7730, 6850, 6770, 6750, 6670 (LP), 6570, 5770, 5750, 5670, 5550, 4850, 4830, 4770, 4730, 4670, 4650, 4550, 4350 (LP), 3870, 3850, 3690, 3650, 3470, 3450, 2600 XT, 2600 Pro, 2400 XT, 2400 Pro, X1950 XTX, X1950 XT, X1950 Pro, X1950 GT, X1900 XTX, X1900 XT, X1900 GT, X1800 XT, X1800 XL, X1800 GTO, X1650 XT, X1650 Pro, X1600 XT, X1600 Pro, X1550, X1300 XT, X1300 Pro, X1300
NVIDIA GeForce
GTX 1050(Ti), 750 (Ti), 650 (Ti), GTS 450, 240 (OEM), GT 740, 640, 630, 440, 340, 330, 320, 240, 220 (not LP), 130 (OEM), 120 (OEM), 9800 GTX+, 9800 GTX, 9800 GT, 9600 GT, 9600 GSO 512, 9600 GSO, 9500 GT (not LP), 9400 GT (not LP), 8800 GTS 512 (G92), 8800 GTS (G92), 8800 GT, 8800 GS (9600GSO), 8600 GTS, 8600 GT GDDR3, 8600 GT DDR2, 8500 GT (not LP), 7950 GT, 7900 GTX, 7900 GT, 7900 GS, 7800 GTX 512, 7800 GTX, 7800 GT, 7600 GT, 7200 GS (TC)
* The compatibility list is based on AMD Radeon and NVIDIA's reference board layout only. Please check the height restriction drawing before purchase.
Manual
English
Deutsch
Français
Español
Italiano
Русский
čeština
Suomalainen
Magyar
Polskie
Svensk
FAQ
Compatibility with AMD R9-280(X), 7970 and 7950
The Accelero L2 PLUS is compatible to the above mentioned boards if the GPU was manufactured after February 2013. Please put a ruler on top of the GPU and check whether there is a gap between the ruler and the GPU. If there is a gap, the GPU was manufactured before February 2013. In this case please use the Accelero Xtreme IV-280(X).
Pin assignments of ARCTIC VGA coolers
|
Main Cable Set
|
||
|
Pin No.
|
Color
|
Assignment
|
|
1
|
Black
|
Ground
|
|
2
|
Red
|
5-12V
|
|
3
|
Yellow
|
RPM Signal
|
|
4
|
Blue
|
PWM Signal
|
|
Sub-Cable Set
|
||
|
Pin No.
|
Color
|
Assignment
|
|
1
|
Red
|
5-12V
|
|
2
|
Black
|
Ground
|
|
3
|
Yellow
|
RPM Signal
|
Note: Please assure that the pin assignment is identical to the cooler on your graphics card. We have this far no knowledge of any graphics card manufacturer not following this standard. If it should still be the case, you can with help of a needle remove the pins from the plug and rearrange them.
How to use the 4-pin adapter?
Under what conditions do you need a 4-pin adapter?
Your graphics card
1. is using a non-standard cooler socket (e.g. 5-pin, flipped polarity) or
2. is using a passive cooler as the stock cooler
How to connect the 4-pin adapter?
The differences between 7V and 12V socket*
7V: Moderate fan speed. It gives the best balance between cooling performance and noise level. It is recommended for normal usage.
12V: Full fan speed depending on the fan design. It gives the best cooling performance and it is recommended for high duty usage.
*The fan speed is fixed regardless of the GPU's condition.
Steps
1. Ensure your PSU has spare power source and plug in the 4-pin adapter.
2. Connect your ARCTIC graphics card cooler's power plug to the preferred socket.
Please note: Make sure the connector is plugged into the corresponding socket (i.e. A 3-pin plug should be connected to a 3-pin socket and a 4-pin plug should be connected to a 4-pin socket). If the plug is connected to the wrong socket, the motor will burn immediately due to incorrect polarity.
Downloads
 |
Accelero L2 PLUS - Déclaration de Conformité CE (Size: 510.6 KB) |
|
Accelero L2 PLUS - EC Declaration of Conformity (Size: 508.9 KB) |
|
Accelero L2 PLUS - EG Konformitätserklärung (Size: 513.4 KB) |
|
Accelero L2 PLUS - Height Restriction Drawing (Size: 121.7 KB) |
|
Accelero L2 PLUS - Installation Manual (English) (Size: 4 MB) |
|
Accelero L2 PLUS - Installation Manual (French) (Size: 4.2 MB) |
|
Accelero L2 PLUS - Installation Manual (German) (Size: 4.2 MB) |
|
Accelero L2 PLUS - Installation Manual (Italian) (Size: 4.1 MB) |
|
Accelero L2 PLUS - Installation Manual (Russian) (Size: 4 MB) |
|
Accelero L2 PLUS - Installation Manual (Spanish) (Size: 4.2 MB) |
|
Accelero L2 PLUS - RoHS & REACH & PAHs declaration of Conformity (Size: 423.8 KB) |
|
Accelero L2 PLUS - Spec Sheet (English) (Size: 723.1 KB) |
|
Accelero L2 PLUS - Spec Sheet (German) (Size: 724.7 KB) |
Support Form
Related Products
-
MX-2USD 6.99All-round Thermal Compound
Safe Application
Outstanding Thermal Transfer Rate -
MX-4USD 7.99Highest Performance Thermal Compound
Safe Application
Easy Application -
4-pin Adapter - CableUSD 1.99
-
SLI Bridge - 101mm FPC SLI BridgeUSD 5.99SLI Bridge Connector
For two 3-Slot NVIDIA Graphics Cards
Flexible Length of 101 mm
-
Quick Charger 8000 Guarantees Fast and Safe ChargingRegular Price: USD 34.99
Special Price: USD 12.99
-
Z1-3D A must-have for every desk!USD 79.99 -
Z1 Monitor Arm with 4-Port USB HubUSD 59.99
