Your location will be determined automatically by an IP-geolocation. If it does not lead to a correct result since e.g. you are travelling, please register and login. This can be done in a few steps under my ARCTIC / Registration.
If you want to improve the cooling efficiency of your computer you get several case fans working in parallel (since it takes 10 fans to double the noise level). But what does it help if they don't work together? The PST assures that all of your fans listen to one control signal. E.g. you share the CPU Cooler's PWM signal and assure that your case fans stand down at low load and spin up whenever necessary.
Innovative Design Enables Quiet and Efficient Ventilation
The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation. The impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure.
Two Way installation
Blow warm air out of the case
Draw cool air into your case
43 CFM / 73.1 m³/h (@ 1,800 RPM)
0.4 Sone (@ 1,800 RPM)
8.5V DC (@ 100% PWM)
Sub PST Cable Length:
12V DC (Norminal)
Motherboard: +12V DC
PWM control signal
Size & Weight
Standard 92 mm fan holes
Packaging & Box Content
Value Pack - Item Number:
Value Pack - UPC:
"Products with great potential and fantastic price"
At this price range you do not find anything better. ARCTIC has always been synonymous with quality and reliability, this is confirmed by a 6 year guarantee. The silence and design are certainly good reasons for buying these products.
You can only configure the PWM settings via the BIOS. Otherwise, please check the manual for your mainboard.
*The interface varies for different models and the fan speed -settings may be hidden somewhere.
Here's an example with Asus M32N SLI
1. Enable CPU Q-Fan Control
2. Modify "CPU Q-Fan Profile" by choosing Performance, Optimal or Silent.
Instead, you may be asked to configure a target temperature for your CPU. In this case, we recommend entering a value of 65°C. Some BIOS may require a minimum percentage for the PWM-control. The value entered should be at least 25%.
What is the innovative PWM Sharing Technology?read