Search Site

F9 PWM

4-Pin PWM fan with standard case

Availability: In stock

USD 6.79
USD 6.79


"Superb cooling performance"


"High class performance
at a low noise level"
Long Service Life
The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage. Thus this bearing is as quiet as a sleeve bearing but comes with a significantly higher service life
Perfect Case Fan Regulation with PWM
The PWM function allows the motherboard to run the fan precisely at its necessary speed. This guarantees the required cooling and minimizes the noise level.
Innovative Design Enables Quiet and Efficient Ventilation
The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation. The impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure.
Two Way installation
Blow warm air out of the case
Draw cool air into your case
Fan


Performance
Fan Speed:

Air Flow:
43 CFM / 73.1 m³/h (@ 1,800 RPM)
Noise Level:
0.4 Sone (@ 1,800 RPM)
Electrical Characteristics
Typical Voltage:
12V DC
Start-up Voltage:
8.5V DC (@ 100% PWM)
Cable Length:
400mm


Voltage Current
20% PWM 100% PWM
12V DC (Norminal) 0.02 0.15
7V DC 0.01 0.09
5V DC 0.01 0.06
Connection
Motherboard: +12V DC
PWM control signal
4-pin socket



Size & Weight




Standard 92 mm fan holes
Packaging & Box Content




Warranty
Shipping Information
Item Number:
AFACO-090P2-GBA0
UPC:
0872767006713

FAQ

How to configure the PWM settings?read

You can only configure the PWM settings via the BIOS. Otherwise, please check the manual for your mainboard.

* The interface varies for different models and the fan speed -settings may be hidden somewhere.

Here's an example with ASRock H170 Pro4/D3.

1. Enable CPU Fan Setting

2. Modify "CPU Fan Setting" by choosing Customize, Silent Mode, Standard Mode, Performance Mode or Full Speed.





Instead, you may be asked to configure a target temperature for your CPU. In this case, we recommend entering a value of 65°C. Some BIOS may require a minimum percentage for the PWM-control. The value entered should be at least 25%.

Why did I get a F PWM and not a F PWM Rev. 2?

All our F PWM case fan models are from the Revision 2. The tag "Rev. 2" has been left out from the product description, as the changes compared to its precedessor are minimal. You always get the latest models, even if it doesn't explicitly say "Rev. 2".

Downloads

Support Form

Contact Information

Your request

* Required Fields

 

  • PST Cable
    USD 4.99
    PST Cable
    PWM Sharing Cable
    Centralized Cooling at minimal Noise Level
    Share the PWM Signal with several PWM Fans

Request Form

The product you selected is currently unavailable. Please send us a request and we get back to as soon as possible.

* Required Fields