Facebook Instagram LinkedIn Youtube Twitter
Search Site

BioniX P140

Pressure-optimised 140 mm Gaming Fan with PWM PST

Availability: In stock

USD 14.99
USD 14.99

* Required Fields

USD 14.99

Also available:

Optimised for Static Pressure

During the development of the new BioniX P140, special emphasis was placed on a focused airstream and thus a high static pressure.
The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the BioniX P140 is particularly
suitable for use on heatsinks and radiators.

More Efficient Technology

The motor is powered by a Neodym-Iron-Boron-Magnet ring of the
newest generation, which allows the new BioniX P140 to run much
more efficiently than its predecessors.
This saves energy and lowers the coil temperature without comprimising
the performance.

BioniX P140

BioniX F140

Power Consumption

1.8 W @ 1950 RPM
3.0 W @ 1800 RPM

Maximum Quietness, Minimum Vibration

Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable.
Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor.

Fan with newly developed
ARCTIC motor
Fan with regular motor and
Fan with regular motor
without vibration absorption

Noise Level

5 % vibration from

50 % vibration from

100 % vibration from

Extended Life Span

A 10 °C lower motor temperature roughly doubles the life span of a fan.
The new ARCTIC motor has a four times longer service life through its
low coil temperature.
Consequently, we have extended the warranty to 10 years.

BioniX P140
(New ARCTIC Motor)
No-Name 120 mm Fan
(Typical DC-Motor)

Coil Temperature @ 22 °C Ambient Temperature

35.4 ℃
54.5 ℃

200 to 1950 RPM
regulated via PWM PST

With a wide range of regulation and the PWM Sharing Technology (PST), the BioniX P140 fan speed can be controlled synchronously with all your other fans together. This keeps noise at a minimum while guaranteeing maximum cooling performance when needed.

High Quality Bearing

Thanks to an alloy/lubricant combination developed in
Germany, friction within the bearing is reduced and
greater efficiency is achieved.
As a result, there is less heat development as well as
less bearing noise, which means you can enjoy a longer service life from your fan.

Two Way Installation

Pull warm air out of the case

Pull cool air into your case

140 mm, 200 - 1.950 RPM (Controlled by PWM)
Air Flow:
77.6 CFM / 131.92 m³/h (@ 1.950 RPM)
Noise Level:
0.45 Sone (@ 1.950 RPM)
Static Pressure:
2.85 mm H2O (@ 1.950 RPM)
Electrical Characteristics
Typical Voltage:
0.15A / 12 V DC
Cable Length:
400 mm
Sub PST Cable Length:
50 mm
Motherboard: +12V DC
PWM control signal
4-pin connector + 4-pin socket
Size & Weight
Packaging & Box Content

Shipping Information
Item Number UPC EAN
ACFAN00127A 872767009462 4895213701525

Item Number UPC EAN
ACFAN00128A 872767009479 4895213701532

Item Number UPC EAN
ACFAN00159A 84003340024-4 489521370235-5

Item Number UPC EAN
ACFAN00160A 84003340022-0 489521370235-5
"OCinside.de Recommendation 11 / 2018"
The ARCTIC BioniX P120 and P140 fans have no weaknesses in terms of volume and cooling performance. [...] The vibration damping of the ARCTIC motors is also convincing. [...] All in all, the new ARCTIC BioniX P120 / P140 fans are absolutely recommendable and thus receive our editors ocinside.de recommendation award 11 / 2018.
BioniX P140 and P14 PWM PST deliver what ARCTIC promises for the P-Series fans: Optimized for high static pressure, they are well suited for use in the CPU heatsinks or radiators, according to our measurements. Especially at maximum speed,... [more]
Hardware Luxx
The new range of Arctic fans feature high static pressure, ideal to accompany a Watercooling radiator.<br />Featuring identical blade design, we will choose the Bionix P1x0 series for its more elaborate look. For a fan with a less... [more]
Due to the long fan blades, the fan achieves a high static pressure even at a low speeds, making it ideal for use on a radiator. For such an application, not only the static pressure makes it very suitable, but also its very low noise level.
Mod Your Case


We recommend Neo Reader, available at    OS
Manual on your mobile
Align and scan!


ARCTIC Fan Guide

Static pressure and air flow in fans - what does that mean?

In addition to the size and the speed of a fan, air flow and static pressure are two important metrics for evaluating the performance of a fan.

For air flow, the transported air volume is measured in cubic meters per hour (m³ / h) or alternatively in cubic feet per minute (CFM). The pressure, however, is measured in mm H²O, with the so-called (milli-) meters of water gauge and corresponds to the pressure in the given water depth.

Information about the air flow therefore gives you information about the maximum amount of air that can be moved by the fan, whereas figures about the static pressure provide information about the pressure with which the air is transported.

Why do you need a high airflow in fans?

Air is a very poor conductor of heat. Without any air circulation, powerful PC components would quickly thermal throttle due to heat accumulation.

The rotational movement of the fan blades creates a mechanical air flow. The airflow transports warm air away and draws in new, cooler air to the heatsink, thus preventing thermal throttling. This, of course, has a big influence on the cooling performance.

What is static pressure important for?

Static pressure is important for cooling performance in situations where completely free air circulation impossible. This may be, for example, a close-meshed housing inlet, or radiators and heatsinks, with their closely spaced cooling fins. In order to guarantee high air circulation through these resistors, the highest possible static pressure is required.

Without a correspondingly high static pressure, the desired air circulation is not achieved, whereby cooling power is lost.

Are the P-fans compatible with my existing Freezer 33?

Yes, the 120 mm versions of the new P-fans can be easily mounted to existing Freezer 32 and Freezer 33 models. This should lead to improved cooling performance.

At the same time, you can benefit from the new engine technology with all its advantages and customization options with the color variations of the PWM-equipped P-fan.

Why are no anti-vibration pads included?

Thanks to the new motor technology of the PWM-equipped P-fans, only 5 % of the commutation vibration of a conventional DC motor is generated. Modern sinus-magnetizing guarantees an even power distribution, which eliminates the need for additional rubber buffering.

My PWM fan stops regularly - is it defective?

No, the fan is not defective. Thanks to the new engine technology, our new PWM fans can operate in a 0 db mode. If the PWM signal falls below 5 %, the fan stops and thus operates completely silently.

If the operating load of the computer rises and more cooling is necessary, the fan is automatically informed via PWM and starts again.

How do I configure my PWM settings?

You can only configure the PWM settings via your BIOS. Please consult your motherboards user manual for additional information.

What is the PWM sharing technology?

An explanation of how the PWM sharing technology (PST) works can be found here:

How many fans can I connect in series via PWM PST?

Up to four fans can be connected via the ARCTIC PWM PST technology.

I want to mount the Bionix P140 to my AIO radiator, but the screws do not fit. What am I doing wrong?

When replacing fans of non-ARCTIC compact water coolers with ARCTIC’s Bionix P140, it’s possible that the pre-assembled screws may not fit. Compatible screws are available from ARCTIC support. Please send a request with attached proof of purchase to: cs@support.arctic.ac

Pin assignment

Pin No. Wire Colour Wire Colour Wire Colour Power/Signal
Pin 1 Black Black Black (with White mark) Ground
Pin 2 Red Yellow Black VDC +12V
Pin 3 Yellow Green Black RPM Signal
Pin 4 Blue Blue Black PWM Signal

Pin No. Wire Colour Wire Colour Wire Colour Power/Signal
Pin 1 Black Black Black Ground
Pin 2 Red Yellow Black VDC +12V
Pin 3 N/A (Empty) N/A (Empty) N/A (Empty) RPM Signal
Pin 4 Blue Blue Black PWM Signal


Support Form

Contact Information

Your request

  • I agree, that my personal data will be processed to answer my contact request and to contact me by email or telephone. I can revoke the given consent at any time with effect for the future in any appropriate form.

* Required Fields


  • Fan Grill
    USD 4.99
    Fan Grill
    Protects the fan from external objects
    Offers protection from fast-spinning fan blades
    Available in different sizes

Request Form

The product you selected is currently unavailable. Please send us a request and we get back to as soon as possible.

* Required Fields