Your location will be determined automatically by an IP-geolocation. If it does not lead to a correct result since e.g. you are travelling, please register and login. This can be done in a few steps under my ARCTIC / Registration.
"One of the cheapest but able to compete with the top"
Long Service Life
The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage. Thus this bearing is as quiet as a sleeve bearing but comes with a significantly higher service life.
Perfect Case Fan Regulation with PWM
The PWM function allows the motherboard to run the fan precisely at its necessary speed. This guarantees the required cooling and minimizes the noise level.
Fan Controller Made in Germany
The ARCTIC F14 PWM PST fan is well known for high airflow at a comfortable noise level. The real improvement is the motor and controller. Our German engineers made this fan work at lower speed when performance is not needed. Often motherboards don't provide PWM signals below 40 % and thus make PCs unnecessary loud - not so with the F14 PWM PST.
If you want to improve the cooling efficiency of your computer you get several case fans working in parallel (since it takes 10 fans to double the noise level). But what does it help if they don't work together? The PST assures that all of your fans listen to one control signal. E.g. you share the CPU Cooler's PWM signal and assure that your case fans stand down at low load and spin up whenever necessary.
Innovative Design Enables Quiet and Efficient Ventilation
The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation. The impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure.
Two Way installation
Blow warm air out of the case
Draw cool air into your case
74 CFM / 126 m3/h (@ 1,350 RPM)
0.3 Sone (@ 1,350 RPM)
6.0V DC (@ 100% PWM)
Sub PST Cable Length:
Motherboard: +12V DC PWM control signal 4-pin socket
You can only configure the PWM settings via the BIOS. Otherwise, please check the manual for your mainboard.
*The interface varies for different models and the fan speed -settings may be hidden somewhere.
Here's an example with Asus M32N SLI
1. Enable CPU Q-Fan Control
2. Modify "CPU Q-Fan Profile" by choosing Performance, Optimal or Silent.
Instead, you may be asked to configure a target temperature for your CPU. In this case, we recommend entering a value of 65°C. Some BIOS may require a minimum percentage for the PWM-control. The value entered should be at least 25%.
What is the innovative PWM Sharing Technology?read