Search Site

F14 PWM

4-Pin PWM fan with standard case

Availability: In stock

USD 8.99
USD 8.99


"Superb cooling performance"


"High class performance
at a low noise level"
Long Service Life
The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage. Thus this bearing is as quiet as a sleeve bearing but comes with a significantly higher service life.

Perfect Case Fan Regulation with PWM
The PWM function allows the motherboard to run the fan precisely at its necessary speed. This guarantees the required cooling and minimizes the noise level.

Fan Controller Made in Germany

The ARCTIC F14 PWM fan is well known for high airflow at a comfortable noise level. The real improvement is the motor and controller. Our German engineers made this fan work at lower speed when performance is not needed. Often motherboards don't provide PWM signals below 40 % and thus make PCs unnecessary loud - not so with the F14 PWM.
Innovative Design Enables Quiet and Efficient Ventilation
The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation. The impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure.
Two Way installation
Blow warm air out of the case
Draw cool air into your case
Fan type


Performance
Fan Speed:

Air Flow:
74 CFM / 126 m³/h (@ 1,350 RPM)
Noise Level:
0.3 Sone (@ 1,350 RPM)

Electrical Characteristics
Typical Voltage:
12V DC
Current:
0.3A
Start-up Voltage:
6.0V DC (@ 100% PWM)
Cable Length:
400mm
Connection
Motherboard: +12V DC
PWM control signal
4-pin socket

Size & Weight




Standard 140 mm fan holes
Packaging & Box Content




Warranty
Shipping Information
Item Number:
ACFAN00078A
UPC:
872767008526

FAQ

How to configure the PWM settings?read

You can only configure the PWM settings via the BIOS. Otherwise, please check the manual for your mainboard.

*The interface varies for different models and the fan speed -settings may be hidden somewhere.

Here's an example with Asus M32N SLI

1. Enable CPU Q-Fan Control

2. Modify "CPU Q-Fan Profile" by choosing Performance, Optimal or Silent.

Instead, you may be asked to configure a target temperature for your CPU. In this case, we recommend entering a value of 65°C. Some BIOS may require a minimum percentage for the PWM-control. The value entered should be at least 25%.

Downloads

Support Form

Contact Information

Your request

* Required Fields

Request Form

The product you selected is currently unavailable. Please send us a request and we get back to as soon as possible.

* Required Fields