Search Site

S3 Turbo Module

Powerful Ventilation Add-On for Accelero S3

Availability: In stock

USD 12.99
USD 12.99
Enhanced Cooling Performance
The S3 Turbo Module is the ultimate extension for the Accelero S3, boosting the already excellent cooling capacity up to 200 Watts.The test shows that this combo reduces the GPU temperature of an AMD R9 270 by up to 17 degrees.
Cooling Performance & Noise Level on AMD R9 270
Accelero S3 + S3 Turbo Module (at 1,000 RPM)
55 °C
0.25 Sone

Accelero S3
69 °C
0 Sone
3 slot Generic
Cooler
(at 2,500 RPM)
72 °C
1.2 Sone
Better
*Accelero S3 is not included with purchase.
Extreme quiet Operation
Thanks to the ultra-quiet 120 mm fan with a maximum spinning speed of 1,350 RPM the Turbo Module generates a merely 0.25 Sone in operation.That way it significantly increases the potential power of your passive cooling system while it remains almost inaudible.
Simple clip-on installation
A simple clip-on designallows the S3 Turbo Module to be easily installed onto your Accelero S3 in a minute.
Fan

        

Performance
Fan Speed:
550 - 1,350 RPM (Controlled by PWM )
Noise Level:
0.25 Sone

Electrical Characteristics
0.13 A, 7 V (930 RPM)
0.23 A, 12 V (1,350 RPM)


Compatibility
Accelero S1 Rev.2 / Accelero S1 PLUS / Accelero S2 / Accelero S3 /
Size & Weight


Packaging & Box Content




Warranty
Shipping Information
Item Number:
ACACC00004A
UPC:
8727008106

Manual

Manual on your mobile
Align and scan!

FAQ

Pin assignments of ARCTIC VGA coolers

Pin No.
Color
Assignment
1
Black
Ground
2
Yellow
5-12V
3
Green
RPM Signal
4
Blue
PWM Signal

Note: Please assure that the pin assignment is identical to the cooler on your graphics card. We have this far no knowledge of any graphics card manufacturer not following this standard. If it should still be the case, you can with help of a needle remove the pins from the plug and rearrange them.

How to use the 4-pin adapter?

Under what conditions do you need a 4-pin adapter?

Your graphics card

1. is using a non-standard cooler socket (e.g. 5-pin, flipped polarity) or
2. is using a passive cooler as the stock cooler

How to connect the 4-pin adapter?

The differences between 7V and 12V socket*

7V: Moderate fan speed. It gives the best balance between cooling performance and noise level. It is recommended for normal usage.
12V: Full fan speed depending on the fan design. It gives the best cooling performance and it is recommended for high duty usage.

*The fan speed is fixed regardless of the GPU's condition.

Steps

1. Ensure your PSU has spare power source and plug in the 4-pin adapter.

2. Connect your ARCTIC graphics card cooler's power plug to the preferred socket.

Please note: Make sure the connector is plugged into the corresponding socket (i.e. A 3-pin plug should be connected to a 3-pin socket and a 4-pin plug should be connected to a 4-pin socket). If the plug is connected to the wrong socket, the motor will burn immediately due to incorrect polarity.

How to Set the fan control curve by software?

Nvidia and AMD graphics cards come with a fan speed controller, which is not necessarily programmed according to your preference and focuses on holding the GPU temperature between 85 and 95°C.

Please download and install the fan controller software MSI Afterburner (https://gaming.msi.com/features/afterburner)

1) Please activate "Start Up" and click on the button "Fan Curve"

2) Create a fan control curve by putting control points.

Be aware that Nvidia's fan controller does no longer work with PWM values but fixed fan speeds. Thus 30%~1050 RPM, 40%~1400 RPM, 50%~1900 RPM, 60%~2400 RPM; no matter whether you use a 40mm fan which can do 10,000 RPM max or a 140mm fan which can go only up to 1400 RPM. In the later case the fan runs at the 40% setting already at full speed.

Our Recommendations:
AMD: 20%/50°C, 30%/55°C, 40%/60°C, 50%/62°C, 60%/64°C, 70%/68°C, 80%/70°C, 100%/75°C
Nvidia: 20%/2°C, 20%/50°C, 30%/60°C, 40%/65°C, 50%/70°C, 60%/75°C, 100%/85°C, 100%/90°C

Downloads

Support Form

Contact Information

Your request

* Required Fields

Request Form

The product you selected is currently unavailable. Please send us a request and we get back to as soon as possible.

* Required Fields