W1B
Extendable Wall-Mount Monitor Arm with Quick-Fix SystemAvailability: In stock
Adjustment without Removing the Monitor
With the W1B mounting head, tighten or loosen the swivel per your need in just a few seconds. No need to take the monitor down.

Designation | Width x Height | Screw | Compatible |
---|---|---|---|
MIS-D75 | 75mm x 75mm | M4, M5 | Yes |
MIS-D100 | 100mm x 100mm | M4, M5 | Yes |
MIS-E | 200mm x 100mm | M4 | No |
MIS-F |
200mm x 200mm
|
M6, M8 | No |
Plasma TV such as LG, Viewsonic,
HP, NEC, AOC and Dell






Item Number | UPC | EAN |
ORAEQ-MA006-GB | 4895213701112 | 872767006324 |
Manual

FAQ
How to ensure the monitor stays and does not tilt forward naturally?
Method 1:
1. Tighten the screw under the ball joint.
If you are not satisfied with the result, use Method 2.
Method 2:
1. Remove the monitor from the monitor arm
2. Release (1) and tighten (2) with the hex wrench
3. Test to see if the ball joint is tightened as you want
4. Install the monitor back to the monitor arm
5. Tighten (1) to lock the ball joint tightly.
Downloads
![]() |
W1B - Installation Manual (English) (Size: 2 MB) |
![]() |
W1B - RoHS & REACH & PAHs declaration of Conformity (Size: 239.4 KB) |
![]() |
W1B - Spec Sheet (English) (Size: 768 KB) |
![]() |
W1B - Spec Sheet (German) (Size: 770.4 KB) |